OrbitalHub

NASA dicit:

Near-Earth asteroid Bennu is a rubble pile of rocks and boulders left over from the formation of the solar system. On October 20, 2020, NASA’s OSIRIS-REx spacecraft briefly touched down on Bennu and collected a sample for return to Earth. During this “TAG event,” the spacecraft’s arm sank far deeper into the asteroid than expected, confirming that Bennu’s surface is incredibly weak. Now, scientists have used data from OSIRIS-REx to revisit the TAG event and better understand how Bennu’s loose upper layers are held together.

Credit: NASA’s Goddard Space Flight Center/CI Lab/SVS/Dan Gallagher (KBRwyle): Producer/Jonathan North (KBRwyle): Lead Animator/Kel Elkins (USRA): Lead Data Visualizer/Alexander Bodnar (AIMM): Animator/Adriana Manrique Gutierrez (KBRwyle): Animator/Walt Feimer (KBRwyle): Animator/Lisa Poje (Freelance): Animator/Dan Gallagher (KBRwyle): Narrator/Dante Lauretta (The University of Arizona): Lead Scientist/Kevin Walsh (SwRI): Scientist/Ronald Ballouz (JHUAPL): Scientist/Olivier Barnouin (JHUAPL): Scientist/Rani Gran (NASA/GSFC): Public Affairs Officer/Nancy Neal-Jones (NASA/GSFC): Public Affairs Officer/James Tralie (ADNET): Support/Ernie Wright (USRA): Support/Aaron E. Lepsch (ADNET): Technical Support

NASA dicit:

On May 10, 2021, the Origins, Spectral Interpretation, Resource Identification, Security, Regolith Explorer (OSIRIS-REx) spacecraft will fire its main thrusters for seven minutes and start its long journey home with more than 60 grams (2.1 ounces) of asteroid material in its Sample Return Capsule.

Video credit: NASA Goddard

NASA dicit:

NASA’s first asteroid sample return mission, OSIRIS-REx, will make a daring attempt to “TAG” asteroid Bennu on October 20 – touch its surface and collect a sample for return to Earth. Experience the sample collection event in 360 and watch as OSIRIS-REx contacts the rocky surface of sample site Nightingale on Asteroid Bennu.

Video credit: NASA’s Goddard Space Flight Center/James Tralie (ADNET): Lead Producer, Narrator/Jonathan North (USRA): Animator/Walt Feimer (KBRwyle): Animator/Michael Lentz (USRA): Art Director/Kel Elkins (USRA): Lead Visualizer/Aaron E. Lepsch (ADNET): Technical Support/ Music is “Fight for the Kingdom” from Enrico Cacace and Lorenzo Castellarin

Wikipedia dicit:

Rehearsals will be performed before the sampling event, during which the solar arrays will be raised into a Y-shaped configuration to minimize the chance of dust accumulation during contact and provide more ground clearance in case the spacecraft tips over (up to 45°) during contact. The descent will be very slow to minimize thruster firings prior to contact in order to reduce the likelihood of asteroid surface contamination by unreacted hydrazine propellant. Contact with the surface of Bennu will be detected using accelerometers, and the impact force will be dissipated by a spring in the TAGSAM arm.

Upon surface contact by the TAGSAM instrument, a burst of nitrogen gas will be released, which will blow regolith particles smaller than 2 centimetres (0.8 in) into the sampler head at the end of the robotic arm. A five-second timer will limit collection time to mitigate the chance of a collision. After the timer expires, the back-away maneuver will initiate a safe departure from the asteroid.

OSIRIS-REx will then halt the drift away from the asteroid in case it is necessary to return for another sampling attempt. The spacecraft will use images and spinning maneuvers to verify the sample has been acquired as well as determine its mass and verify it is in excess of the required 60 grams (2.1 oz). In the event of a failed sampling attempt, the spacecraft will return for another try. There is enough nitrogen gas for three attempts.

In addition to the bulk sampling mechanism, contact pads on the end of the sampling head will passively collect dust grains smaller than 1 mm, upon contact with the asteroid. These pads are made from tiny loops of stainless steel.

After the sampling attempt, the Sample-Return Capsule (SRC) lid will be opened to allow the sampler head to be stowed. The arm will then be retracted into its launch configuration, and the SRC lid will be closed and latched preparing to return to Earth.

Video credit: Lockheed Martin

NASA dicit:

When NASA’s OSIRIS-REx spacecraft arrived at asteroid Bennu in December 2018, its close-up images confirmed what mission planners had predicted nearly two decades before: Bennu is made of loose material weakly clumped together by gravity, and shaped like a spinning top. This major validation, however, was accompanied by a major surprise. Scientists had expected Bennu’s surface to consist of fine-grained material like a sandy beach, but were instead greeted by a rugged world littered with boulders – the size of cars, the size of houses, the size of football fields. Now, thanks to laser altimetry data and high-resolution imagery from OSIRIS-REx, we can take a tour of Bennu’s remarkable terrain.

Video credit: NASA’s Goddard Space Flight Center/NASA/University of Arizona/CSA/York University/MDA/Dan Gallagher (USRA): Producer/Kel Elkins (USRA): Lead Visualizer/Jonathan North (USRA): Animator/Adriana Manrique Gutierrez (USRA): Animator/Dan Gallagher (USRA): Narrator/Erin Morton (The University of Arizona): Support/Aaron E. Lepsch (ADNET): Support/“Timelapse Clouds” by Andy Blythe and Marten Joustra; “The Wilderness” by Benjamin James Parsons; “Maps of Deception” by Idriss-El-Mehdi Bennani, Olivier Louis Perrot, and Philippe Andre Vandenhende

Wikipedia dicit:

Using data collected by NASA’s OSIRIS-REx mission, this animation shows the trajectories of particles after their emission from asteroid Bennu’s surface. The animation emphasizes the four largest particle ejection events detected at Bennu from December 2018 through September 2019. Additional particles, some with lifetimes of several days, that are not related to the ejections are also visible.

Video credit: M. Brozovic/JPL-Caltech/NASA/University of Arizona