OrbitalHub

NASA dicit:

NASA’s newest rover captured this rover descent camera POV footage of its February 18 touchdown on Mars.

Video credit: NASA Jet Propulsion Laboratory

NASA dicit:

NASA’s newest rover captured first-of-its kind footage of its February 18 touchdown on Mars. From the moment of parachute inflation, the camera system covers the entirety of the descent process, showing some of the rover’s intense ride to Mars’ Jezero Crater. The footage from high-definition cameras aboard the spacecraft starts 7 miles (11 kilometers) above the surface, showing the supersonic deployment of the most massive parachute ever sent to another world, and ends with the rover’s touchdown in the crater.

Video credit: NASA Jet Propulsion Laboratory

Wikipedia dicit:

The three major components of the Mars 2020 spacecraft are the 539 kg (1,188 lb) cruise stage for travel between Earth and Mars; the Entry, Descent, and Landing System (EDLS) that includes the 575 kg (1,268 lb) aeroshell descent vehicle + 440 kg (970 lb) heat shield; and the 1,070 kg (2,360 lb) (fueled mass) sky crane needed to deliver Perseverance and Ingenuity safely to the Martian surface. The Sky Crane carries 400 kg (880 lb) landing propellant for the final soft landing burn after being slowed down by a 21.5 m (71 ft) wide 81 kg (179 lb) parachute. The 1,025 kg (2,260 lb) rover is based on the design of Curiosity. While there are differences in scientific instruments and the engineering required to support them, the entire landing system (including the sky crane and heat shield) and rover chassis could essentially be recreated without any additional engineering or research. This reduces overall technical risk for the mission, while saving funds and time on development.

One of the upgrades is a guidance and control technique called “Terrain Relative Navigation” (TRN) to fine-tune steering in the final moments of landing. This system will allow for a landing accuracy within 40 m (130 ft) and avoid obstacles. This is a marked improvement from the Mars Science Laboratory mission that had an elliptical area of 7 by 20 km (4.3 by 12.4 mi). In October 2016, NASA reported using the Xombie rocket to test the Lander Vision System (LVS), as part of the Autonomous Descent and Ascent Powered-flight Testbed (ADAPT) experimental technologies, for the Mars 2020 mission landing, meant to increase the landing accuracy and avoid obstacle hazards.

Video credit: Aerojet Rocketdyne

Lockheed Martin dicit:

Protecting a Mars Rover against the extremes of space travel is critical to the success of any mission. At Lockheed Martin, we’ve built aeroshells to protect all 10 of NASA’s Mars-bound landers and rovers.

For NASA’s latest mission — Mars 2020, which includes the Perseverance rover and Ingenuity helicopter — we built the protective aeroshell and helicopter delivery system. Mars 2020 will attempt the most challenging entry, descent and landing (EDL) sequences ever at Mars. The rover will touch down in the treacherous Jezero Crater, a region filled with boulders, rocky cliffs and shifting sand dunes.

Video credit: Lockheed Martin

ULA dicit:

A United Launch Alliance Atlas V 541 rocket will launch NASA’s Perseverance rover to Mars. The spacecraft will explore the Jezero Crater to study the planet’s habitability, seek signs of past microbial life, collect and store samples of selected rock and soil and prepare for future human missions. The rover also carries the Ingenuity helicopter, a technology demonstration to prove that powered flight can be achieved at Mars.

Video credit: United Launch Alliance

Wikipedia dicit:

Ingenuity (also known as the Mars Helicopter) is a robotic helicopter that is planned to be used to test the technology to scout interesting targets on Mars, and help plan the best driving route for future Mars rovers. The small drone helicopter is planned for deployment in 2021 from the Perseverance rover as part of the Mars 2020 mission. It is expected to fly up to five times during its 30-day test campaign, early in the rover’s mission, as it is primarily a technology demonstration. Each flight is planned to take no more than three minutes, at altitudes ranging from 3 to 10 m above the ground. It could potentially cover a distance of up to 300 metres (980 ft) per flight. It can use autonomous control and communicate with the Perseverance rover directly after each landing. If it works as expected, NASA could build on the design for future Mars aerial missions.

Video credit: NASA/JPL-Caltech